Monday, December 28, 2020

Hello Robot:Stretch

 https://svrobo.org/hello-robot-wins-innovation-award-in-svr-good-robot-industry-awards/



Stretch from Hello Robot 

CEO: Aaron Edsinger                

Founded: 2017            

HQ:  Martinez, CA  

Hello Robot has reinvented the mobile manipulator. In July 2020 they launched Stretch, the first capable, portable, and affordable mobile manipulator designed specifically to assist people in the home and workplace. At a fraction the cost, size, and weight of previous capable mobile manipulators, Stretch’s novel design is a game changer.

Stretch has a low mass, contact-sensitive body with a compact footprint and slender telescopic manipulator, so that it weighs only 51lb. Stretch is ready for autonomous operation as well as teleoperation, with Python interfaces, ROS integration and open source code. In the future, mobile manipulators will enhance the lives of older adults, people with disabilities, and caregivers. Hello Robot is working to build a bridge to this future.

Read more: https://spectrum.ieee.org/automaton/robotics/home-robots/hello-robots-stretch-mobile-manipulator

Tuesday, December 15, 2020

$5 Wi-Fi IP Surveillance Camera (Very little DIY needed)



https://github.com/espressif/arduino-esp32






ESP32-CAM-MB CH340G ESP8266 ESP32-S Wireless WiFi Bluetooth Expansion Board OV2640 2MP Camera SMD IPEX Antenna for Arduino MCU
[ESP32-CAM-MB CH340G Serial Micro USB]
Description:
The ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, which is convenient to be applied to various IoT hardware terminal occasions.
 
Parameters:
Using low-power dual-core 32-bit CPU, it can be used as an application processor.
The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS
Built-in 520 KB SRAM, external 8MB PSRAM
Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces
Support OV2640 and OV7670 cameras, built-in flash
Support picture WiFI upload
Support TF card
Support multiple sleep modes.
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss one-click network configuration
Support secondary development
 
Application:
Home smart device image transmission
Wireless monitoring
Smart agriculture
QR wireless recognition
Wireless positioning system signal
And other IoT applications
 
Specification:
Working voltage: 4.75 -5.25V
SPIFlash: 32Mbit
RAM: Internal 520KB + external 8MB PSRAM
Wi-Fi: 802.11b/g/n/e/i
Bluetooth: Bluetooth 4.2BR/EDR and BLE standard
Support interface: (2Mbps) UART, SPI, I2C, PWM
Support TF card: up to 4G
IO port: 9
Serial port rate: 115200bps
Spectrum range: 2400 -2483.5MHz
Antenna form: onboard PCB antenna, gain 2dBi
Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE
Transmit power:
802.11b: 17±2dBm (@11Mbps)
802.11g: 14±2dBm (@54Mbps)
802.11n: 13±2dBm (@MCS7)
Receiving sensitivity:
CCK, 1Mbps: -90dBm
CCK, 11Mbps: -85dBm
6Mbps(1/2BPSK): -88dBm
54Mbps(3/464-QAM): -70dBm
MCS7 (65Mbps, 72.2Mbps): -67dBm
Power consumption:
Flash off: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: The lowest power consumption can reach 6mA@5V
Moderm-sleep: The minimum can reach 20mA@5V
Light-sleep: The lowest can reach 6.7mA@5V
Security: WPA/WPA2/WPA2-Enterprise/WPS
Working temperature: -20℃ -70℃
Storage environment: -40℃ -125 ℃, <90%RH
 
[ESP32-CAM]
Modle: ESP32-CAM
Operating Voltage: 5V
SPI Flash: 32 Mbit
RAM: Inter 520KB+, External 4M PSRAM
Bluetooth: BLuetooth 4.2 BR/EDR & BLE standard
WIFI: 802.11/b/g/n/e/i
Port: UART, SPI, I2C, PWM
IO Port: 9
Serial port rate: 115200 bps
Picture form: JPEG (only OV2640 support), BMP, GRAYSCALE
Spectrum range: 2412 -2484MHz
Antanna: Onboard PCB Antanna 2dBi
Security: WPA/WPA2/WPA2-Enterprise/WPS
Operating Temperature: -20 -85℃
Storage Tepmerature: -40 -90℃, <90%RH
 
Transmit power: 
802.11b: 17+/-2 dBm (@11Mbps)
802.11g: 14+/-2 dBm (@54Mbps)
802.11n: 13+/-2 dBm (@MSC7)
 
Receive Sensitivity:
CCK, 1 Mbps: -90dBm
CCK, 11 Mbps: -85dBm
6 Mbps(1/2 BPSK): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
 
[ESP32-S]
The main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and a computing power of up to 600DMIPS.
Default 32Mbit SPI Flash, 520KB SRAM
Support SoftAP and Station mode
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.
Support for firmware upgrade (FOTA)
Antenna supports on-board antenna or IPEX block output
 
[OV2640 Camera Module]
Feature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
 
Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports Vario Pixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array 1632 x 1232
Maximum format UXGA IO
Voltage 1.7V -3.3V
Analog voltage 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep<20uA
Temperature operation -30 -70℃
Stable working 0 to 50 Degrees Celsius
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size 1/4"
Viewing angle 25°
Maximum rate 15fps
SXGA sensitivity 1.3V / (Lux-sec )
Signal to noise ratio 40dB
Dynamic range 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area 2.2 um x 2.2 um
Dark current 15 mV / s at 60℃

Wednesday, November 25, 2020

Skype teases AI-powered video bots that let you interact with characters and brands


This was April 2016, Looks like they lost interest?


 https://www.geekwire.com/2016/skype-video-bots/

Botiful - Telepresence Robot

 

This article is a work in progress...   Be patient. 


So a friend hands me a white plastic pod and says "here's a Botiful, it's based on the Yo Yo", looking expectantly at me thinking this gibberish would mean something to me . My response was "A bot if what?" looking puzzled at the palm sized cart. 

I vaguely remember seeing a little bit about this gadget but at the time my focus was on bigger things, and totally dismissed it.  

Surrendering your cell phone to drive it around could never go as far as anything more then a toy.

Soon to be forgotten and not something that would ever make it past a novelty product.  At best a good Holiday gift for a season. I couldn't have been more right. 

Well Botiful was put on a kickstarter and was funded to 93,000 just clearing their 90,000 goal. with estimated delivery in Mid-2012  

Actually shipped in 2014?  



It's based on the ioio board at $40, that google put out at one of their conferences and had a big hackathon in April 2011. 


Pronounced (YoYo like the toy) . 

PIC24FJ256

https://en.wikipedia.org/wiki/IOIO

https://www.sparkfun.com/products/retired/12633

https://learn.sparkfun.com/tutorials/ioio-otg-hookup-guide/software-downloads-and-installation-


All open source hardware is connected to an Android phone over USB.
Then developers can control it though a Java Library you add to an Android app.   This encouraged Android application development and opened IOT , I/O and Robotics applications. 

Lots Phone to Phone driving apps, but the real killer app was Skype support.

...


Skype only briefly supported the PTZ Pan Tilt Zoon that naturally mapped in to forward,backward ,left right, and zoom could be up and down. 

So skype was able to support this out of the box. 

A new feature just for you in Skype 3.0 for Android

user avatar
ClaireCreator
November 20, 2012
I am really pleased to announce that Skype released the auto answering feature today, with Skype 3.0 update for Android !

I met with Skype Android team two months ago, to discuss about what could be developed on the Skype Android app to make it more friendly for robots. And auto answer was definitively your most wanted feature, that's what I told them. And they did it ! I just received a confirmation that the feature is included with today's update ! You will now be able to call your robot from anywhere without needing someone to pick up the call.

You can update Skype today on your android and enjoy this new feature !




https://github.com/Botiful    Last updated 2017.  

https://www.kickstarter.com/projects/1452620607/botiful-telepresence-robot-for-android

https://hackaday.com/2012/08/01/telepresence-robot-with-skype-connectivity/


http://www.botiful.me  No longer exists. And archive.org didn't capture the exe and zip files offered with java binaries (almost as good as source code) but these are now lost in time.